B.2.2 create partitions – IEI Integration KINO-HM551 User Manual

Page 116

KINO-HM551

Page 102

Step 2:

Install a hard driver or SSD in the KINO-HM551. An unformatted and

unpartitioned disk is recommended.

Step 3:

Connect an optical disk drive to the KINO-HM551 and insert the recovery CD.

Step 4:

Turn on the system.

Step 5:

Press the <DELETE> key as soon as the system is turned on to enter the BIOS.

Step 6:

Select the connected optical disk drive as the 1

boot device. (Boot

 Boot

Device Priority

 1

Boot Device).

Step 7:

Save changes and restart the computer. Continue to the next section for

instructions on partitioning the internal storage.

B.2.2 Create Partitions

To create the system backup, the main storage device must be split into two partitions

(three partitions for Linux). The first partition will be for the operating system, while the

second partition will be invisible to the operating system and contain the backup made by

the one key recovery software.