IEI Integration PICOe-GM45A - Manual (Page 102)

PICOe-GM45A Half-Size CPU Card
Page 102
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the PICOe-GM45A LPT box-header connector. See
815H
Figure 5-15.
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the 26-pin box-header connector on the PICOe-GM45A, connect the cable
connector to the on-board connector. See
816H
Figure 5-15.
Figure 5-15: LPT Cable Connection
Step 4: Attach the LPT connector to the chassis. To secure the LPT interface
connector to the chassis please refer to the installation instructions that came
with the chassis.
Step 5: Connect LPT device. Once the LPT interface connector is connected to the
chassis, the LPT device can be connected to the LPT interface connector. See
817H
Figure 5-16 Step 0:\