ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 297)

Transferring a Full Disclosure File to a Compact Flash Card
9650-0904-01 Rev. K ZOLL R Series Operator’s Guide 12–3
To remove a compact flash card:
Press the release button and pull the card out of the slot.
Figure 12-2. Removing a Compact Flash Card
Transferring a Full Disclosure File to a Compact Flash
Card
Make sure that a compact flash card is installed in the slot on the left side of the device.
To transfer data to a compact flash card:
1. Turn the Mode Selector to ON.
2. Press the Manual Mode softkey.
Note: If the CONFIRM MANUAL MODE message displays, press the Confirm softkey to
enter the Manual mode of operation.
3. Press the Report Data softkey.
4. Press the Transfer Mode softkey.
5. Press the Report to Card softkey.
The message TRANSFERRING DATA is displayed. The full disclosure file is transferred to
the installed CF data card.
Note: Do not remove the CF card while files are transferring. Corruption may result on the
data card.
When all files are transferred, the message DATA TRANSFERRED is displayed. You can now
remove the CF card from the R Series unit.
To exit Data Transfer Mode, press the Exit Transfer softkey.