ZOLL Propaq MD Rev A - Manual (Page 190)

C HAPTER 17 P RINTING
17–2 www.zoll.com 9650-0805-01 Rev. A
Printer Setup
To configure the printer functions, press the More quick access key ( ), press the Setup quick
access key ( ), highlight Printer, and press Select. Use the navigation keys to select the
desired print configuration. The Setup>Printer window contains the following print
configuration options:
Automatic Prints
You can print any following events by setting the monitor to print automatically in the
Setup>Supervisor>Printer window. To do this, press (
), then press . Using the
navigation buttons, select Supervisor, and then Printer.
• Defib/Pacer Events
• Event
• Treatment Snapshot
• Treatment Summary Snapshots
Printing Waveforms
You can print waveforms by pressing the Print quick access key ( ). The Propaq MD unit
will print the displayed waveforms as configured in the Number of Traces option. The Print
Number of Traces option can be set to
1 , 2 , or 3 . Patient vital sign numerics are printed above
the waveforms.
Note: Waveforms that have invalid data print a dashed line for that trace.
The ECG Waveform
ECG waveforms are printed on a grid with major divisions (dotted lines) every 5mm and minor
divisions (single dots) every 1 mm. The ECG waveform is always printed if ECG is monitored.
The Invasive Pressure Waveform
Pressure waveforms are printed on a grid with major divisions (vertical dotted lines) every 5
mm, and the pressure scale grids are printed horizontally.
Print configuration Options
Print Speed 25 mm or 50 mm per second
Print Number of Traces 1, 2, or 3
Print Grid On or Off
Print on Snapshot On or Off
Print on Patient Alarm On or Off
Print on NIBP On or Off
Print on Trend On or Off