ZOLL Propaq M Rev B - Manual (Page 40)

C HAPTER 2 P RODUCT O VERVIEW
2–12 www.zoll.com 9650-000820-01 Rev. B
Using the Select Button
Use the Select button to do the following:
• Display the settings window while a parameter is highlighted in the main window.
• Select options from a window.
Display Brightness
The monitor can display in three different brightness modes:
• high contrast with white background (for optimal display in bright sunlight)
• color with black background (numerics and waveforms are easy to read)
• night vision goggle (NVG) friendly (display and alarm LEDs prevent interference with
goggles)
Common Tasks
The section contains procedures for the following tasks:
• “Changing the Display Brightness” on page 2-12.
• “Replacing a Battery Pack on the Propaq M” on page 2-13.
• “Using Treatment Buttons” on page 2-14
Changing the Display Brightness
The following procedure shows how to select the different brightness options.
1. Press the power switch to turn the unit on.
2. Press the More/Back quick access key ( ).
3. Press the Brightness quick access key ( ) repeatedly to toggle through the brightness
options until you find your selection.
Note: Selecting a higher brightness setting (such as 70%) will deplete the battery pack at a
faster rate than when choosing a lower brightness setting (such as 30%). To select the
brightness setting, go to the Setup>Display/Volume>Display Brightness menu to
adjust the display percentage.