How to use this manual, Operator’s guide updates, Unpacking – ZOLL Propaq M Rev B User Manual
Page 12: Propaq m optional features

C
HAPTER
1 G
ENERAL
I
NFORMATION
1-2
www.zoll.com
9650-000820-01 Rev. B
Propaq M Optional Features
The following features are optional in the Propaq M unit.
Note:
All features are included in this manual, but only purchased features will be available
on your unit.
Figure 1-1 Propaq M Optional Features
How to Use This Manual
The Propaq M Operator's Guide provides information operators need for the safe and effective
use and care of the Propaq M product. It is important that all persons using this device read and
understand all the information contained within.
Please thoroughly read the safety considerations and warnings section.
Procedures for daily checkout and unit care are located in the Chapter 16, "Cleaning and
Maintenance".
Operator’s Guide Updates
An issue or revision date for this manual is shown on the front cover. If more than three years
have elapsed since this date, contact ZOLL Medical Corporation to determine if additional
product information updates are available.
All users should carefully review each manual update to understand its significance and then
file it in its appropriate section within this manual for subsequent reference.
Product documentation is available through the ZOLL website at www.zoll.com. From the
Products menu, choose Product Manuals.
Unpacking
Carefully inspect each container for damage. If the shipping container or cushion material is
damaged, keep it until the contents have been checked for completeness and the instrument has
been checked for mechanical and electrical integrity. If the contents are incomplete, if there is
mechanical damage, or if the monitor does not pass its electrical self-test, U.S.A. customers
should call ZOLL Medical Corporation (1-800-348-9011). Customers outside of the U.S.A.
should contact the nearest ZOLL authorized representative. If the shipping container is
damaged, also notify the carrier.
Optional Feature
12-Lead ECG with Interpretation
SpO
2
(Masimo
®
) with SpCO
®
and SpMet
®
NIBP (with Smartcuf
®
and SureBP
TM
)
EtCO
2
(Oridion
®
Microstream
®
)
Temperature (2 Channels)
Invasive Pressures (3 Channels)