beautypg.com

Communications system messages – ZOLL Propaq M Rev B User Manual

Page 185

background image

Communications System Messages

9650-000820-01 Rev. B

Propaq M Operator’s Guide

15–25

Communications System Messages

The Propaq M unit may display one of the following status messages during the transmission:

System Message

Cause

TRYING TO CONNECT TO
NETWORK

The unit is connecting to the network.

TRYING TO CONNECT TO
SERVER

The unit is connecting to the ZOLL server.

TRANSMITTING

The data transfer is in progress

TRANSMISSION COMPLETE

The data transfer is complete.

TRANSMISSION FAILED

The data transfer has failed.

To correct the problem, check the following:

Verify that wireless communications is enabled
on your Propaq M unit.

Verify that the WiFi settings are correct in the
Communications setup menu.

Verify that the ZOLL server is configured
correctly.

Verify that your cellular device is configured
correctly.

Make sure that the Propaq M unit is within range
of the wireless server.