ZOLL Propaq M Rev B - Manual (Page 204)

Specifications
A-14 www.zoll.com 9650-000820-01 Rev. B
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
(IEC 60601-1-2 Table 203)
The Propaq M unit is intended for use in the electromagnetic environment specified below. The
customer or the user of the Propaq M should assure that it is used in such an environment.
Immunity Test IEC 60601 Test Level Compliance
Level Electromagnetic Environment – Guidance
IEC 60601-1-2
Portable and mobile RF communications
equipment should be used no closer to any
part of the Propaq M unit, including cables,
than the recommended separation distance
calculated from the equation applicable to the
frequency of the transmitter.
Recommended Separation Distance
Conducted RF
IEC 61000-4-6 3 Vrms
150 kHz to 80 MHz
outside ISM bands
a
3 Vrms d = 1.17
3 Vrms
150 kHz to 80 MHz in
ISM bands
a
3 Vrms d = 1.17
Radiated RF
IEC 61000-4-3 10 V/m
80 MHz to 2.5 GHz 10 V/m d = 1.20
80 MHz to 800 MHz
d = 2.30
800 MHz to 2.5 GHz
3 V/m
80 MHz to 2.5 GHz
(IEC 60601-2-34) 3 V/m
(IBP only) d = 4
80 MHz to 800 MHz
d = 7.67
800 MHz to 2.5 GHz
Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended separation distance in meters (m).
b
Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey c , should be
less than the compliance level in each frequency range
d
.
Interference may occur in the vicinity of equipment marked with the following symbol:
P
P
P
P
P
P