Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 83)

75
Merlin Mobile User’s Manual CATC SW Version 2.0
Debug
Enable CATC debug file
Checking this box enables the creation of a file that can be used by CATC
Support to aid in debugging. This option should always be disabled unless
you are requested to enable it by CATC personnel.
6.5 Recording Options - Inquiry
The Inquiry page configures how Merlin Mobile records Inquiry traffic.
Two main options are presented in the Sync Method drop-down menu:
General (Unlimited) Inquiry and Dedicated (Limited) Inquiry. These
options tell Merlin Mobile what kind of Inquiry traffic it should expect to
record.
This page includes settings only for Inquiry recording and BT
Neighborhood.
General (Unlimited)
"General" means "General Inquiry" and is used to search for ALL Bluetooth
devices that are within range, for the amount of time specified in the Inquiry
Timeout field. Completion of the inquiry process is indicated by
illumination of the "trigger" light on the front of the analyzer. All
responding packets will be displayed when data upload from the analyzer
completes.
Dedicated (Limited)
"Dedicated" means a specific class or group of Bluetooth devices
(designated by the DIAC field of the Recording Options dialog). Selecting
"Dedicated" causes Merlin Mobile to search for all devices from a specific
class or group that are within range, for the amount of time specified in the
Inquiry Timeout field. Completion of the inquiry process is indicated by
illumination of the "trigger" light on the front of the analyzer. All
responding packets will be displayed when stop is selected.
BT Neighborhood
These options configure how the BT Neighborhood command behaves. BT
Neighborhood is a utility that performs an Inquiry and then lists the local
devices that it discovered.
• Use Default settings -- Sets the analyzer to record a General Inquiry with an
Inquiry Timeout of 11 seconds.
• Match 'Inquiry' Recording Settings -- Sets the analyzer to use the settings
you chose above under Hop Sequence, Inquiry Type, and Additional Settings.