Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 29)

21
Merlin Mobile User’s Manual CATC SW Version 2.0
Merlin Mobile starts to record the Bluetooth traffic immediately
using the settings from the Piconet page in the Recording
Options dialog. The Bluetooth Inquiry process will proceed for
whatever amount of time is set for creating an Inquiry action (0
to 80 seconds). After the inquiry time has elapsed, the analyzer
will uploads the data and displays the packets.
After a few moments, the recording will terminate and the results
will display. The screen should look like the sample recording
below which shows the FHS packets generated during the
Inquiry process.
When the recording session is finished, the bus traffic is saved to
the hard drive as a file named data.tfb or whatever name you
assign as the default filename. While the file is being saved, you
should see a brown progress bar at the bottom of the screen.
When the bar turns white, it indicates that the data has been
saved to disk.
Step 6 To save a current recording for future reference, Select Save As
under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.