Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 19)

11
Merlin Mobile User’s Manual CATC SW Version 2.0
Step 5 Select the Driver tab and click on the Update Driver button.
The Update Device Driver Wizard will open.
Step 6 Click Next.
Step 7 Choose “Search for a better driver than the one your device is
using now.” and click Next.
Step 8 Enter or browse to the location of the driver and click Next.
Step 9 Click Next to install the driver.
Note: If a message appears saying that Windows cannot locate the driver,
click OK to close the message box and then enter or browse to the
location of the driver to continue.
Step 10 Click Finish.
Step 11 Click the Driver File Details button to check the driver version
and make sure that the driver was successfully upgraded.
Step 12 Close the remaining open windows.
Updating the Driver on Windows Me
Step 1 Select Start > Settings > Control Panel from the desktop taskbar,
then double-click on System Properties in the Control Panel
window.
The System Properties window will open.
Step 2 Select the Device Manager tab.
Step 3 Look in the CATC Analyzers directory and select CATC Merlin
Mobile Bluetooth Protocol Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select
CATC Merlin Mobile Bluetooth Protocol Analyzer.
Step 4 Click the Properties button.
The Properties window will open.
Step 5 Select the Driver tab and click on the Update Driver button.
The Update Device Driver Wizard will open.
Step 6 Choose “Automatically search for a better driver.” and click
Next.
The Select Other Driver window will open.
Step 7 Select the newest driver and click OK.
The driver will install.
Step 8 Click Finish.
Step 9 Click the Driver File Details button to check the driver version
and make sure that the driver was successfully upgraded.