Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 15)

7
Merlin Mobile User’s Manual CATC SW Version 2.0
2. Getting Started
This chapter describes how to install Merlin Mobile and its software, how to start
Merlin Mobile, and how to set up the analyzer unit.
2.1 Installing Merlin Mobile
Merlin Mobile can be installed on any PC or laptop computer that uses the Windows
98 SE, Windows Me, Windows 2000, or Windows XP operating system and has a
functioning PC Card slot.
Software Installation
The Merlin Mobile software can be installed from the installation CD-ROM or from
installation files downloaded from the CATC website.
Install from CD-ROM
Step 1
Insert the Merlin Mobile installation CD-ROM into the
CD-ROM drive of the computer that will be connected to the
Merlin Mobile analyzer unit.
The autorun program should start automatically. If it doesn’t
start, use Windows Explorer or My Computer to navigate to the
CD-ROM drive directory, double-click the file autorun.exe,
and proceed to Step 2. If it still doesn’t start, navigate to the
\Software directory on the CD-ROM, double-click the file
Setup.exe, and proceed to Step 3.
Step 2 Choose Install Software to start the setup program.
Step 3 Follow the on-screen instructions to complete the installation.
Install from installation download
Step 1 Select Start > Run... from the Windows taskbar and click the
Browse button, then navigate to the Disk 1 directory of the
Merlin Mobile installation download. Select the file Setup.exe
and click Open.
Step 2 Follow the on-screen instructions to complete the installation.
2.2 Hardware Installation
Step 1 Insert the Merlin Mobile analyzer unit into the PC Card slot on
the desktop or laptop computer that will be running the Merlin
Mobile software.