Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 32)

24
Merlin Mobile User’s Manual CATC SW Version 2.0
Recording Mode Presents a drop-down menu with options for setting the analyzer's
recording mode:
Piconet Recording Mode -- Causes Merlin to monitor and record
piconet traffic. Merlin records the traffic data as specified in the
Recording Options, then uploads the data as a Trace file when the
recording is complete.
Inquiry Recording Mode -- Causes Merlin to perform an inquiry to
detects and records Bluetooth devices within range. After completing
the recording, Merlin uploads the trace to the PC and saves it as a Trace
file.
IUT: HCI Recording Mode -- Causes the Merlin software to record
HCI traffic from the IUT. In this mode, the Merlin software on the host
PC directly records IUT traffic without first going through the analyzer.
BT Neighborhood
Inquiry Displays Bluetooth Address and clock frequency for devices in range.
The expected Bluetooth clock frequency is 3200 Hz +/- 250 ppm.
Report
File Information Details such information about the recording as number of packets and
triggering setup.
Error Summary Displays an error summary of the current trace file and allows you to
go to a specific packet, and save the error file to a uniquely named file.
Timing Calculation Starts the calculator dialog for calculating various timing and
bandwidth parameters in the recording file.
Traffic Summary Details the number and type of packets were transferred during the
recording, as well as message-level statistics.
Search
Go to trigger Positions the display to show the first packet that follows the trigger
event.
Go to
Packet/Message/
Protocol ... Positions the display to the indicated packet, LMP/L2CAP message, or
Protocol Message (RFCOMM, TCS, or SDP protocols).
Go to Marker » Positions the display to a previously marked packet.
Go to » Enables quick searching for specific events using a cascade of pop-up
windows.
Find Allows complex searches.
Find Next Repeats the previous Find operation. Can also use F3 to find next.
Search Direction Allows you to specify a forward or backward search of a trace file.
Menu Function