Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 42)

34
Merlin Mobile User’s Manual CATC SW Version 2.0
The Wizard advances to the next screen which presents three options:
• I want to establish a new piconet and have Merlin Mobile record traffic
on that piconet.
This option causes Merlin Mobile to perform an Inquiry so it can discover local
devices and then establish a new piconet and record the piconet traffic.
• I want Merlin Mobile to record traffic on a piconet that has already been
established.
This option lets Merlin Mobile record traffic from an already established piconet.
• I am using Bluetooth Test Mode and want Merlin Mobile to record traffic
on my test piconet.
This option lets Merlin Mobile create either a single frequency range recording of
a range that you specify or create a recording of a limited hop frequency range
consisting of 5 frequency hops.
5.1 Recording a Traffic on a New Piconet
The New Piconet option shown in the previous screen presents users with
the means of recording the traffic from a new piconet. This option will
cause a sequence of screens to prompt you for information such as the
piconet Master address.