Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 134)

126
Merlin Mobile User’s Manual CATC SW Version 2.0
You see the Go to Packet/Message/Protocol window:
Step 2
Enter the number of the packet, message or protocol you want to
display.
Step 3
Click OK.
The Trace View repositions to show the packet at the top of your
screen.
Go to Marker
To instruct the analyzer to display a marked packet,
Step 1
Select Go to Marker under Search on the Menu Bar.
You see a drop-down menu listing the marked packets in that Trace
View:
Step 2 Select the desired packet from the displayed list.
The Trace View repositions to show the packet at the top of your
screen.
Note The Go to Marker feature functions in conjunction with the Set Marker feature.
The comments within the parentheses following each marked packet are added or
edited with the Set Marker feature.