Teledyne LeCroy Merlin Mobile - Users Manual - Manual (Page 18)

10
Merlin Mobile User’s Manual CATC SW Version 2.0
Step 6 Select the Driver tab in the Properties window and click Update
Driver.
The Upgrade Device Driver Wizard will open.
Step 7 Click Next.
Step 8 Choose “Display a list of the known drivers for this device so
that I can choose a specific driver.” Then, click Next.
Step 9 Choose “Have disk” and click Next.
The Install from Disk window will open.
Step 10 Install from the Merlin Mobile installation CD-ROM:
Make sure that the installation CD is in the computer’s
CD-ROM drive, then click Browse and navigate to the \Software
directory on the CD, or type the drive letter followed by
\Software (e.g., “D:\Software”) in the combo box. Click OK.
Install from a directory on the computer’s hard drive:
Browse or enter the path to the Disk 1 directory of the Merlin
Mobile installation, then click OK.
The Install from Disk window will close.
Step 11 Select CATC Merlin Mobile Bluetooth Protocol Analyzer from
the list of devices in the Upgrade Device Driver Wizard and
click Next.
Step 12 Click Next to install the driver.
Step 13 Click Finish to close the Wizard.
Step 14 Check the driver version on the Driver tab of the Properties
window to make sure that the driver was successfully upgraded.
Step 15 Close the remaining open windows.
Updating the Driver on Windows 98 SE
Step 1 Select Start > Settings > Control Panel from the desktop taskbar,
then double-click on System Properties in the Control Panel
window.
The System Properties window will open.
Step 2 Select the Device Manager tab.
Step 3 Look in the CATC Analyzers directory and select CATC Merlin
Mobile Bluetooth Protocol Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select
CATC Merlin Mobile Bluetooth Protocol Analyzer.
Step 4 Click the Properties button.
The Properties window will open.