Updating the driver on windows xp, 7 license keys, Update license – Teledyne LeCroy Merlin Mobile - Users Manual User Manual
Page 20: License keys
12
Merlin Mobile User’s Manual
CATC
SW Version 2.0
Step 10
Close the remaining open windows.
Updating the Driver on Windows XP
Step 1
Select Start > Control Panel from the desktop taskbar, then
double-click Performance and Maintenance.
Step 2
Double-click on System.
The System Properties window will open.
Step 3
Select the Hardware tab and click the Device Manager button.
The Device Manager window will open.
Step 4
Look in the CATC Analyzers directory and select CATC Merlin
Mobile Bluetooth Protocol Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select
CATC Merlin Mobile Bluetooth Protocol Analyzer.
Step 5
Select Action > Update Driver... from the Device Manager menu
bar.
The Hardware Update Wizard will open.
Step 6
Choose “Install from a list or specific location.”
Step 7
Choose “Don’t search” then click Have Disk.
Step 8
Enter or browse to the location of the driver and click OK.
Step 9
Select CATC Merlin Mobile Bluetooth Protocol Analyzer from
the list and click Next.
The driver will install.
Step 10
Click Finish.
Step 11
Select Action > Properties from the Device Manager menu bar
to check the driver version and make sure that the driver was
successfully upgraded.
Step 12
Close the remaining open windows.
2.7 License Keys
A License Key is necessary to enable software maintenance in Merlin Mobile.
License Keys must be obtained from CATC.
Update License
Follow these steps to install a license key:
Step 1
Select Help > Update License… from the menu bar.
The Update License dialog will come up.