Operator's manual – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual

Page 75

Operator's Manual

; of the WFSU remote command.

;

<144> SUBARRAY_COUNT: long ; for Sequence, acquired segment count,

; between 0 and NOM_SUBARRAY_COUNT

;

<148> SWEEPS_PER_ACQ: long ; for Average or Extrema,

; number of sweeps accumulated

; else 1

;

<152> POINTS_PER_PAIR: word ; for Peak Detect waveforms (which always

; include data points in DATA_ARRAY_1 and

; min/max pairs in DATA_ARRAY_2).

; Value is the number of data points for

; each min/max pair.

;

<154> PAIR_OFFSET: word ; for Peak Detect waveforms only

; Value is the number of data points by

; which the first min/max pair in

; DATA_ARRAY_2 is offset relative to the

; first data value in DATA_ARRAY_1.

;

<156> VERTICAL_GAIN: float

;

<160> VERTICAL_OFFSET: float ; to get floating values from raw data :

; VERTICAL_GAIN * data - VERTICAL_OFFSET

;

920836 Rev B