beautypg.com

Miscellaneous - comm_header, chdr, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual

Page 53: Response format, Example

background image

Operator's Manual

MISCELLANEOUS - COMM_HEADER, CHDR

The COMM_HEADER command controls the way the oscilloscope formats responses to queries. There

are three response formats:

• LONG, responses contain the long form of the header : C1:VOLT_DIV 200E-3 V
• SHORT, responses contain the short form of the header : C1:VDIV 200E-3 V
• OFF, headers and units are omitted: 200E-3

Unless you specify otherwise, the SHORT response format is used by default.

This command does not affect the interpretation of messages sent to the oscilloscope. Headers can be sent in

their long or short form regardless of the COMM_HEADER setting.

Command Syntax

Comm_HeaDeR

:= {SHORT, LONG, OFF}

Query Syntax

Comm_HeaDeR?

Response Format

Comm_HeaDeR

Example

The following instruction sets the response header format to LONG:

CHDR LONG

920836 Rev B

51