Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 56)

WaveAce Remote Control
MISCELLANEOUS – FILENAME, FLNM
The FILENAME command is used to change the default filename given to any traces, setups or hard
copies (screen prints) when being saved to a mass storage device.
Command Syntax
FiLeNaMe TYPE,,FILE,''
Where:
:= {C1,C2,C3,C4,SETUP,TA,TB,TC,TD,HCOOPY}
:=
alphanumeric string of up to 8 characters forming a legal DOS filename, enclosed by quotes.
Query Syntax
FiLeNaMe? TYPE,
: {ALL,C1,C2,C3,C4,SETUP,TA,TB,TC,TD,HCOOPY}
Response Format
FILENAME TYPE,,FILE,''[TYPE,,FILE,''…]
Example
The following command names Channel 1 waveform file 'TESTWF.DAV':
FLNM TYPE,C1,FILE, 'TESTWF'
NOTE: The file’s extension is automatically specified by the oscilloscope.
Related Commands
DIRECTORY, DELETE_FILE
54 920836 Rev B