Operator's manual – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual

Page 73

Operator's Manual

< 68> RES_ARRAY2: long

< 72> RES_ARRAY3: long ; 2 expansion entries are reserved

;

; The following variables identify the instrument

;

< 76> INSTRUMENT_NAME: string

;

< 92> INSTRUMENT_NUMBER: long

;

< 96> TRACE_LABEL: string ; identifies the waveform.

;

<112> RESERVED1: word

<114> RESERVED2: word ; 2 expansion entries

;

; The following variables describe the waveform and the time at

; which the waveform was generated.

;

<116> WAVE_ARRAY_COUNT: long ; number of data points in the data

; array. If there are two data

; arrays (FFT or Extrema), this number

; applies to each array separately.

;

<120> PNTS_PER_SCREEN: long ; nominal number of data points

; on the screen

;

<124> FIRST_VALID_PNT: long ; count of number of points to skip

920836 Rev B