Teledyne LeCroy WaveAce 1000_2000 Remote Control - Manual (Page 22)

WaveAce Remote Control
ACQUISITION - ATTENUATION, ATTN
The ATTENUATION command selects the vertical attenuation factor of the probe. Values up to 1000
can be specified.
The ATTENUATION? query returns the attenuation factor of the specified channel.
Command Syntax
: ATTeNuation
:= {C1,C2,C3,C4,EX,EX10}
:= {1,5,10,50,100,500,1000}
Query Syntax
:ATTeNuation?
Response Format
:ATTeNuation
Example
The following instruction sets to 100 the attenuation factor of Channel 1:
C1:ATTN 100
20 920836 Rev B