beautypg.com

Acquisition - trig_level, trlv, Command syntax, Query syntax – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual

Page 31: Response format, Example, Related commands

background image

Operator's Manual

ACQUISITION - TRIG_LEVEL, TRLV

The TRIG_LEVEL command adjusts the trigger level of the specified trigger source. An out-of-range

value will be adjusted to the closest legal value.
The TRIG_LEVEL? query returns the current trigger level.

Command Syntax

[]:TRig_LeVel

:= {C1,C2,C3,C4,EX5}

Query Syntax

:TRig_LeVel?

Response Format

:TRig_LeVel

Example

The following instruction adjusts the trigger level of Channel 2 to -3.4 V:

C2:TRLV -3.4V

Related Commands

TRIG_COUPLING, TRIG_DELAY, TRIG_MODE, TRIG_SELECT, TRIG_SLOPE

920836 Rev B

29

See also other documents in the category Teledyne LeCroy Equipment: