Command syntax, Query syntax, Response format – Teledyne LeCroy WaveAce 1000_2000 Remote Control User Manual

Page 69: Example, Related commands, Operator's manual

Operator's Manual

NOTE: The format of the waveform data depends on the current settings specified by the last

WAVEFORM_SETUP command.

Command Syntax

:WaveForm ALL,

:= {M1,M2,M3,M4,M5,M6,M7,M8,M9,M10}

:= waveform data block.

Query Syntax

:WaveForm?

:= {TA,TB,TC,TD,C1,C2,C3,C4,M1,M2,M3,M4,M5,M6,M7,M8,M9,M10}

:= {DESC, TEXT, TIME, DAT1, DAT2, ALL}

If you do not provide a parameter,

ALL

is assumed.

Response Format

:WaveForm ,

TIP: It may be convenient to disable the response header if the waveform is to be restored. Refer to the

COMM_HEADER, CHDR command topic for more information.

Example

The following instruction reads the block DAT1 from Memory 1.

M1:WF? DAT1

Related Commands

WAVEFORM_SETUP

920836 Rev B