LevelOne GSW-4876 User Manual
Page 97
C
HAPTER
4
| Configuring the Switch
Configuring Security
– 97 –
■
Unauthorized - The port is in Force Unauthorized mode, or a
single-supplicant mode and the supplicant is not successfully
authorized by the RADIUS server.
■
X Auth/Y Unauth - The port is in a multi-supplicant mode. X
clients are currently authorized and Y are unauthorized.
◆
Restart - Restarts client authentication using one of the methods
described below. Note that the restart buttons are only enabled when
the switch’s authentication mode is globally enabled (under System
Configuration) and the port's Admin State is an EAPOL-based or MAC-
Based mode. Clicking these buttons will not cause settings changed on
the page to take effect.
■
Reauthenticate - Schedules reauthentication to whenever the
quiet-period of the port runs out (EAPOL-based authentication). For
MAC-based authentication, reauthentication will be attempted
immediately. The button only has effect for successfully
authenticated clients on the port and will not cause the clients to
get temporarily unauthorized.
■
Reinitialize - Forces a reinitialization of the clients on the port and
thereby a reauthentication immediately. The clients will transfer to
the unauthorized state while the reauthentication is in progress.
W
EB
I
NTERFACE
To configure 802.1X Port Security:
1.
Click Advanced Configuration, Security, Network, NAS.
2.
Modify the required attributes.
3.
Click Save.