LevelOne GSW-4876 User Manual
Page 40

C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 40 –
Protocol-based
VLAN
Protocol to
Group
Creates a protocol group, specifying supported protocols
Group to VLAN
Maps a protocol group to a VLAN for specified ports
IP Subnet-based
VLAN
Maps traffic for a specified IP subnet to a VLAN
Voice VLAN
Configuration
Configures global settings, including status, voice VLAN ID,
VLAN aging time, and traffic priority; also configures port
settings, including the way in which a port is added to the
Voice VLAN, and blocking non-VoIP addresses
OUI
Maps the OUI in the source MAC address of ingress packets
to the VoIP device manufacturer
QoS
Port Classification Configures default traffic class, drop priority, user priority,
drop eligible indicator, classification mode for tagged frames,
and DSCP-based QoS classification
Port Policing
Controls the bandwidth provided for frames entering the
ingress queue of specified ports.
Port Scheduler
Provides overview of QoS Egress Port Schedulers, including
the queue mode and weight; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
Port Shaping
Provides overview of QoS Egress Port Shapers, including the
rate for each queue and port; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
Port Tag
Remarking
Provides overview of QoS Egress Port Tag Remarking; also
sets the remarking mode (classified PCP/DEI values, default
PCP/DEI values, or mapped versions of QoS class and drop
priority)
Port DSCP
Configures ingress translation and classification settings and
egress re-writing of DSCP values
DSCP-Based QoS
Configures DSCP-based QoS ingress classification settings
DSCP Translation Configures DSCP translation for ingress traffic or DSCP re-
mapping for egress traffic
DSCP
Classification
Maps DSCP values to a QoS class and drop precedence level
QoS Control List
Configures QoS policies for handling ingress packets based
on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or
VLAN priority tag
Storm Control
Sets limits for broadcast, multicast, and unknown unicast
traffic
WRED
Configures minimum threshold and drop probabilities for
queues 0-5 using Weighted Random Early Detection
Congestion
Management
Forwards traffic only if the destination port is not congested
Mirroring & RSPAN
Sets source and target ports for local or remote mirroring
UPnP
Enables UPNP and defines timeout values
Table 4: Main Menu (Continued)
Menu
Description
Page