LevelOne GSW-4876 User Manual
Page 117
C
HAPTER
4
| Configuring the Switch
Configuring Security
– 117 –
C
ONFIGURING
G
LOBAL
AND
P
ORT
S
ETTINGS
FOR
ARP I
NSPECTION
Use the ARP Inspection Configuration page to enable ARP inspection
globally for the switch and for any ports on which it is required.
P
ATH
Advanced Configuration, Security, Network, ARP Inspection, Configuration
P
ARAMETERS
These parameters are displayed:
Global Configuration
◆
Mode – Enables Dynamic ARP Inspection globally. (Default: Disabled)
◆
Translate dynamic to static – Click to translate all dynamic entries to
static entries.
Port Mode Configuration
◆
Port – Port identifier
◆
Mode – Enables Dynamic ARP Inspection on a given port. Only when
both Global Mode and Port Mode on a given port are enabled, will ARP
Inspection be enabled on a given port. (Default: Disabled)
W
EB
I
NTERFACE
To configure global and port settings for ARP Inspection:
1.
Click Advanced Configuration, Security, Network, ARP Inspection,
Configuration.
2.
Enable ARP inspection globally, and on any ports where it is required.
3.
Click Save.
Figure 39: Configuring Global and Port Settings for ARP Inspection