LevelOne GSW-4876 - Manual (Page 262)

C HAPTER 5 | Monitoring the Switch
Showing MLD Snooping Information
– 262 –
S HOWING MLD S NOOPING I NFORMATION
Use the MLD Snooping pages to display MLD snooping statistics, port
members of each service group, and information on source-specific groups.
S HOWING MLD
S NOOPING S TATUS
Use the IGMP Snooping Status page to display MLD querier status and
snooping statistics for each VLAN carrying multicast traffic, and the ports
connected to an upstream multicast router/switch.
P ATH
Monitor, IPMC, MLD Snooping, Status
P ARAMETERS
These parameters are displayed:
Statistics
◆ VLAN ID – VLAN Identifier.
◆ Querier Version – MLD version used by the switch when serving as
the MLD querier.
◆ Host Version – MLD version used when used by this switch when
serving as a host in MLD proxy mode.
◆ Querier Status – Shows the Querier status as “ACTIVE” or “IDLE.”
When enabled and selected through the bidding process, the switch can
serve as the Querier, which is responsible for asking hosts if they want
to receive multicast traffic.
◆ Queries Transmitted – The number of transmitted Querier messages.
◆ Queries Received – The number of received Querier messages.
◆ V1 Reports Received – The number of received MLD Version 1
reports.
◆ V2 Reports Received – The number of received MLD Version 2
reports.
◆ V1 Leaves Received – The number of received MLD Version 1 leave
reports.
Router Port
◆ Port – Port Identifier.
◆ Status – Ports connected to multicast routers may be dynamically
discovered by this switch or statically assigned to an interface on this
switch.