LevelOne FCS-9900 - Manual (Page 92)

92
To toggle allow show video on event:
1. Ensure that the CMS Client is logged in to the matrix as described above.
2. Select the matrix you want to configure.
3. Click the Toggle Allow Show Video on Event button .or select Edit “Show On Event” Mode. Select grids
you want to show video on events. Clicking again can disable allow show video on events.
4. Choose Select All to toggle allow all grids show video on events.
5. Choose Clear All to disable allow all grids show video on events.
6. For advanced management, click on Setting…
You are able to define up to 16 different groups indicated with 16 different colors under Group Setting.
To toggle tour:
1. Ensure that the CMS Client is logged in to the matrix as described above.
2. Select the matrix you want to configure.
3. Click Toggle Tour button .
4. Click Toggle Tour button again to disable tour.
Joystick Control
Matrix system can be controlled by a joystick. Prior to setup, it requires a joystick device connected to CMS Client computer.
To setup Joystick Control:
1. Click the Edit button and point to Joystick Setting.
2. In Joystick Setting Window, select the Active Joystick you want to use.
3. Select the function and the parameter from drop-down menu for the button of joystick. The function are as below:
 N/A – make the button ineffective.
 Go to Preset Point – go to the preset point of the view on a matrix or a live video. Select the parameter for the preset
point.
 Go to Previous Grid – go to previous grid on a matrix.
 Go to Next Grid – go to next grid on a matrix.
 Switch Matrix Grid – switch grids of a matrix.
 Toggle Single Camera View – toggle select camera to single view.
 Start/Stop Autoscan –start/stop autoscan on a matrix.
 Zoom Wide – zoom wide of the view on a matrix.
 Zoom Tele – zoom tele of the view on a matrix.
 Switch Active Matrix – switch into different matrix.
 Go to Matrix View – go to Matrix List Window.