Alarms, Adding/copying/editing/removing alarms, To add an alarm – LevelOne FCS-9900 User Manual
Page 42
42
Alarms
The alarm functions of the CMS Client can be configured to monitor many different events triggered by cameras, input
devices, output devices, and servers.
To carry out the functions described below, you need to be in Edit Mode and Commit after setup (see
Adding/Copying/Editing/Removing Alarms
To add an alarm:
1. Ensure that the client is in Edit Mode and the Configuration window is selected.
2. Right-click on the Alarm folder icon
, then click Add Alarm.
3. In the Alarm Configuration window, enter an alarm name and alarm description.
4. Choose an alarm priority and an alarm owner from the drop-down lists.
5. Choose from the following settings:
Choose a coverage (default coverage is Always). The coverage here is based on the alarm source device’s local
time.
Enter a rearm interval. If the rearm interval is too short (default interval is 5 sec.), multiple alarms may be
triggered by certain events such as motion.