IAI America RCA2-SD4N - Manual (Page 51)

8. Installation
43
[Mounting procedure]
1) Check the accuracy on the actuator side and load side.
Adjust the position so the accuracy can be maintained at the value shown below or less in the
whole range of the load side movement.
L
A A 0.02
0.05 B B
Load-side bracket
Actuator-mounted-side bracket
2) Mount the main unit of the actuator.
3) Move the load-side bracket to confirm that there is no problem in the precision of the position to
the shaft of the rod.
Confirm that the shaft of the rod can be inserted without a touch to the inside face of the mating
hole on the bracket.
Confirm a smooth insertion
without interference or touch
Caution : Make sure to have the position accuracy for the actuator and the load side as
indicated.
Failure to do so may cause abnormal noise, vibration, operational failure or shorter
product life.