IAI America RCA2-SD4N - Manual (Page 44)

7. Installation and Storage/Preservation Environment
36
7. Installation and Storage/Preservation Environment
7.1 Installation Environment
Do not use this product in the following environment
It is generally the environment where a worker can work without any protection gear.
Also make sure to keep enough work space necessary for maintenance.
• Location exposed to radiant heat from a huge heat source such as the heat treatment
• Location where the surrounding air temperature exceeds the range of 0 to 40qC
• Location where condensation occurs due to abrupt temperature changes
• Location where relative humidity exceeds 85%RH
• Location exposed to direct sunlight
• Location exposed to corrosive gases or combustible gases
• Location exposed to significant amount of dust, salt or iron powder (Outside of ordinary assembly
plant)
• Location where water, oil (includes oil mist and cutting fluid) or chemical is splashed
• Location where the product main body receives vibration or hit impact
When using the product in any of the locations specified below, provide a sufficient shield.
• Location subject to electrostatic noise
• Location where exposed to the influence of strong electric or magnetic field
• Location where exposed to the influence of ultraviolet or radiant rays
Open space required for maintenance inspection
Ɣ Motor coupling types
250mm or more
Ɣ Motor reversing types
250mm or more
300mm or more