Ronan X96S DENSITY GAGE User Manual
Page 56

Density Gage Manual 012407
52
Detector Service
the critical components of the electronic circuit and the
PMT/Crystal Assembly are aligned before leaving the
factory. If any component of the Scintillation Detector
is adjusted or replaced, the performance of the entire
system will be adversely affected and will require
realignment before continued use is possible.
Therefore, the scintillation detector IS NOT field
serviceable. Should a problem arise with the detector,
the entire Detector Assembly should be returned to
Ronan for repair/replacement.
See also other documents in the category Ronan Equipment:
- X16PDM (53 pages)
- X120 (35 pages)
- X11SN (23 pages)
- X11CB (2 pages)
- X11CA (20 pages)
- X11CA Software Manual (65 pages)
- X11CA Hardware Manual (53 pages)
- X500F (60 pages)
- X71 (8 pages)
- X57 (8 pages)
- X55-600 Series (24 pages)
- X54-3412 (2 pages)
- X54-3402 (2 pages)
- X54-3302 (2 pages)
- X54-3224 (2 pages)
- X54-3212 (2 pages)
- X54-3202 (2 pages)
- X76CTM (38 pages)
- 7100M (2 pages)
- XSD-1000 (81 pages)
- X90 Series (20 pages)
- X96S WEIGH SCALE (68 pages)
- X96S MOLD LEVEL GAGE (61 pages)
- X96S LEVEL GAGE (56 pages)
- X96S MASS FLOW GAUGE (77 pages)
- Interface System (5 pages)
- Ion Chamber Detector (2 pages)
- Rigid Scintillation Detector (3 pages)
- Scintillation FlexDetector (3 pages)
- LS-S (2 pages)
- SA-4 (2 pages)
- GS-200 (2 pages)
- GS-400 (2 pages)
- SA-1 (2 pages)
- RLL-1_1A (2 pages)