Ronan X96S DENSITY GAGE - Manual (Page 29)

Density Gage Manual 012407 25
Relay and TTL Menus
The Relay and TTL menus are used to configure the X96S Relay Outputs and the 4 TTL Outputs. The Relay and TTL menus
show the settings of the corresponding 4 Relay Outputs and 4 TTL Outputs, allowing the characteristics of the outputs to be
changed. Each menu contains the following items:
Output
(Cont’d.)
ITEM FUNCTION
Relay 1 Selecting this takes the user to the Relay 1 menu
Relay 2 Selecting this takes the user to the Relay 2 menu
Relay 3 Selecting this takes the user to the Relay 3 menu
Relay 4 Selecting this takes the user to the Relay 4 menu
TTL 1 Selecting this item takes the user to the TTL 1 menu
TTL 2 Selecting this takes the user to the TTL 2 menu
TTL 3 Selecting this takes the user to the TTL 3 menu
TTL 4 Selecting this takes the user to the TTL 4 menu
Digital Inputs Menu
This menu is used to view and configure the digital input(s). It contains the following item:
ITEM FUNCTION
Input 1 Selecting this takes the user to the Input 1 menu
Input 1 Menu
The Input 1 menus (is used to configure the X96S digital input. It contains the following items:
ITEM FUNCTION
Use Shows, and allows the user to set, the use of the digital input
Polarity Shows, and allows the user to set, the active state of the digital input
Use is one of the following:
ITEM MEANING
Not Used This digital input is not used
Auto Ref A “true” on this digital input indicates that the X96S should perform the auto reference
procedure
Polarity is one of the following:
ITEM MEANING
Low A “true” is represented by a low signal on the digital input
High A “true” is represented by a high signal on the digital input