Ronan X96S DENSITY GAGE - Manual (Page 38)

Density Gage Manual 012407 34
Safety Precautions
During installation the RSO will provide guidelines to
assure safety. Consider the information presented in the
Regulation/Safety Chapter of this manual, as well as the
following general guidelines:
The source holder must remain padlocked in the OFF position
until installation is complete.
Take all necessary precautions to assure that the source holder
is not dropped or damaged.
A specifically licensed individual MUST inspect the
installation prior to placing the source holder in the ON
position.
Always turn the source holder to the OFF position when
working around it, the detector, or the area between these two
components which is referred to as the "measuring gap."
When the source holder is placed in the ON position, avoid the
"active beam."