Ronan X96S DENSITY GAGE - Manual (Page 25)

Density Gage Manual 012407 21
Hardware Menu
The Hardware menu is used to define the type of hardware used to provide measurements and radiation. It contains the
following items:
ITEM FUNCTION
System Hardware Shows the user the list of hardware modules in the system and the status of these
modules
Proc Temp Shows and allows the user to set the type of device used to read process temperature
Source Type Selecting this item takes the user to the Source Type menu
Pressure Shows and allows the user to set the type of device used to read process pressure
Analog Out Config Shows and allows the user to set the source of power as internal or external
HART Output Shows and allows the user to adjust the HART output functions
Com1 Protocol Shows and allows the user to adjust the Com1 Protocols [None/Hart/Ronan Setup]
The System Hardware menu takes the user to a list of the hardware modules in the system and the status of these modules:
ITEM FUNCTION
CPU Card Shows the type of CPU card installed (in slot 1)
CPU Status Status of the CPU card
DIO Card Shows the type of DIO (Digital Input/Output) card installed (in slot 2)
DIO Status Status of the DIO card
Slot 3 Card Shows the type of card (if any) installed in slot 3
Slot 3 Status If a card is installed in slot 3, shows the status of the card, else shows None
Slot 4 Card Shows the type of card (if any) installed in slot 4
Slot 4 Status If a card is installed in slot 4, shows the status of the card, else shows None
Slot 5 Card Shows the type of card (if any) installed in slot 5
Slot 5 Status If a card is installed in slot 5, shows the status of the card, else shows None
Slot 6 Card Shows the type of card (if any) installed in slot 6
Slot 6 Status If a card is installed in slot 6, shows the status of the card, else shows None
Slot 7 Card Shows the type of card (if any) installed in slot 7
Slot 7 Status If a card is installed in slot 7, shows the status of the card, else shows None
Slot 8 Card Shows the type of card (if any) installed in slot 8
Slot 8 Status If a card is installed in slot 8, shows the status of the card, else shows None
Display X96-2002 Shows the type of display module (if any attached)
Display Status Shows the status of the display module if attached, or else shows None
HART X96-2005 Shows the type of the HART interface (if any) present
HART Status Shows the status of the HART interface, if the interface is present, else shows None
Proc Temp is one of the following:
ITEM MEANING
None No temperature measurement device configured
pt100_a_385 Platinum RTD with an alpha of 885 (commonly used in USA)
pt100_a_392 Platinum RTD with an alpha of 892 (commonly used in Europe)
ni120 Nickel RTD
0-10 volts Temperature measurement device that provides a 0 to 10 volt signal
4-20 ma Temperature measurement device that provides a 4-20 ma signal