Fairbanks AN Series Fairbanks Access Solutions - Manual (Page 68)

Section 3: Access Terminal Screens Defined
01/13 68 51299 Rev. 1
3.2.15. Weightment Setup, Continued
NOTE:
Not compatible with the standard traffic control features. Please make sure those
features are off if any of these options are enabled.
Get Weight Before Prompts: Enable this option to have the terminal get the weight
before the prompts are displayed to the driver
Split weigh all trailers: This requires a trailer that does has no or little tongue weight
on the vehicle. The vehicle will pull onto the scale (but not the trailer) and start the
transaction. The system will get the vehicles weight. Then the vehicle will pull ahead
so that only the trailer is on the scale. The driver will then answer prompts at the
terminal. The terminal will then get the weight of the trailer and finish the transaction.
Traffic Sign: Select a sign to guide the driver across the scale.
Output: Select an output to control a light or gate to guide the driver across the
scale.