Fairbanks AN Series Fairbanks Access Solutions User Manual
Page 50
Section 3: Access Terminal Screens Defined
01/13
50
51299 Rev. 1
1
3
4
3
4
3.2.11. Traffic Control Setup, Continued
SCREEN PORTION 1 General Setup –
Monitor:
•
No Traffic – simple in and out weighing without need to stage scale devices.
•
Inbound Traffic – Enables inbound Traffic Devices, or section only.
•
Outbound Traffic – Enables outbound Traffic Devices, or section only.
•
In & Outbound Traffic – Enables Outbound and Inbound Traffic
or both and
Loading: Determines when the system will guide and check for vehicle on the scale.
•
No Vehicle Loading
•
Before Transaction Starts- Always use when Access Unit is located on Scale
•
Before Getting the Weight- When Access Unit is positioned before scale
Give Preference: Used when two terminals are controlling traffic across the scale.
Each terminal is controlling traffic from one direction (inbound / outbound). Checking
one of the two will give one of the terminals a preference.
Deny Other Traffic: Generally both inbound and outbound transactions can be done
at the same Access Unit, when enabled this is not allowed. The inbound unit can
only start a transaction and the outbound can only complete it, otherwise a service
denied error will appear.