Fairbanks AN Series Fairbanks Access Solutions - Manual (Page 52)

Section 3: Access Terminal Screens Defined
01/13 52 51299 Rev. 1
3
3.2.11. Traffic Control Setup, Continued
Screen Capture shows Input selections
and latch times. Not shown but latch
goes from 0-30 seconds.
Timeouts –
- Timeout with no weight
If a vehicle is detected but then there is no
weight on the scale this timeout will
determine how long the system will wait
before going back to waiting for a vehicle
to arrive.
- Timeout with weight
If there is weight on the scale this timeout
will apply. Generally this should be set to
“None” to allow the driver all the time he
needs to start the transaction.
SCREEN PORTION 3 Inbound Traffic Devices