Radius spilt offset screen – Darex XPS-16 Operating Instructions User Manual
Page 37
![background image](/manuals/346980/37/background.png)
37
•
The +C button will stop the rotation of
the cutting edge further away from the
grinding wheel.
The -C button will stop the rotation of
the cutting edge closer to the grinding
wheel.
•
Touch the “SAVE” button to store the
“New” information and transfer you
back to the previous screen.
•
Selecting “CANCEL” will delete any
unsaved data, retrieving the most re-
cently saved information transferring you back
to the previous screen.
NOTE: After values have been manually en-
tered into the Web Thickness Screen, you
cannot change the point angle, point style
or split style. If you do, the values in Web
and Advance will be removed. This is to pre-
vent incorrectly sharpening the next drill.
•
To disable the R-Split offsets, touch the
“AUTO” button, in the manual web de-
tection screen.
Web Detection Screen
The Radius Split Offset feature will become dis-
abled and you will exit manual web detection
mode.
Rotation
C+
Looking from rearof drill bit toward face of
wheel. Drill bit rotating in C+direction during
radius split.
Radius Spilt Offset Screen
Looking from rear of drill bit toward face of
wheel. Drill bit rotating in C- direction during
radius split.
Rotation
C-