Darex XPS-16 Operating Instructions - Manual (Page 112)

User Manual Page 19
Removing and Replacing the Cooling Fan
Removing the Cooling Fan
1. Remove the 2 screws holding the panel to the
machine.
2. Swing the panel open.
3. There are red and black wires coming from
the fan and a white and green wire coming
from the power switch. They merge into a
connector. Disconnect the connector. The
panel will swing open further.
4. Note the white and green wires that go to the
switch. Pull the 2 blade connectors from the
switch.
5. On the front of the panel, snap the fan filter
cover from the fan.
6. Using a nut driver to hold the nuts inside the
panel, remove the 4 screws holding the fan in
place. The front cover comes off and the fan
can be removed from the inside along with the
aluminum baffle.