Split point offset screen selector, Touch screen details – Darex XPS-16 Operating Instructions User Manual

Page 29

•

After offsets are entered, touch the

“SAVE” button to store the “New” infor-

mation and transfer you back to the pre-

vious screen. Changes to the wheel offset

will return to previous setting unless the

“PERMANENT FILE SAVE” is used. See

Page 27.

•

Selecting “CANCEL” will delete any

unsaved data, retrieving the most re-

cently saved information, transferring you

back to the previous screen.

Split Point Offset Screen

Selector

•

In this screen you can offset 5 different areas

of the split point. A. Depth of split, B. Center

of split, C. Fan Angle D. Split Angle and E.

Radius Split.

Split Point Offset Screen

Α.

Depth of split: Increase depth of split

using the +Z button , or decrease depth

of split using the -Z button

Β. Center of split: Use the +X button , to

move the center split line towards the

chisel line (removes more material) on

the drill point, or the -X button , to move

it away. (removes less material)

Α. Fan Angle: This option is more for drill aes-

thetics than functionality. Utilizing this option

may be necessary to remove more or less of
the heel to mimic a certain style. The selected

split angle, amount of relief and degree of the

point angle will determine the actual fan angle

produced. Regard the degree entered as a

reference number only, the fan angle pro-

duced has a tolerance of +/- 15°.

•

Touch the “FAN ANGLE” button, the

Number Key Pad will come up.

•

Type in the desired fan angle degree.

•

Touch the “SAVE” button to store the

“New” information and transfer you back

to the previous screen.

•

Selecting “CANCEL” will delete any

unsaved data, retrieving the most re-

cently saved information, transferring

you back to the previous screen.

D. Split Angle: Type in the desired split angle,

typically 120° to 130°. By increasing the rota-

tion of the split angle, the split portion of the

drill meets the cutting lip at a greater angle,

which will give that area more strength and

durability. This added split angle creates a

pointed profile at the very center of the drill,

which will produce a self-centering effect and

reduces drill point walking at the start of a

hole.

A
B

Fan Angle

Split Angle

Past Center To Center Not To Center

Touch Screen Details