Darex XPS-16 Operating Instructions - Manual (Page 119)

User Manual Page 27
1. Turn the machine on.
2. Push the check icon.
3. Push the tool icon.
Removing and Replacing Grind Motor Assembly F1, 2 &3 only
4. Push the belt change icon.
5. The X-Axis will move into the belt change po-
sition and stop. Shut the machine off and dis-
connect power source.
6. Refer to Grind Motor Belt Replacement instruc-
tions and remove belt. See Section 24 Sche-
matics and Work Instructions page 29.
7. Unplug the motor connector wires.