Darex XPS-16 Operating Instructions - Manual (Page 16)

16
MATERIAL TAKE OFF #1 ALARM
UNABLE TO DETECT END OF DRILL
Refer to
information on page 63
CUTTING EDGE DETECTION ALARM - UN-
ABLE TO LOCATE CUTTING EDGE
Refer to
information on page 63
MATERIAL TAKEOFF #2 ALARM
Refer to
information on page 63
CLOSE
DOOR
ALARM
Refer to
page 64
INSERT DRILL
ALARM - NO
DRILL DE-
TECTED IN
CHUCK
Refer to
information on
page 63
REMOVE DRILL
ALARM - DRILL
LEFT IN CHUCK
Refer to infor-
mation on page
63
Z - AXIS ALARM Refer to
information on page 69
C-AXIS ALARM
Refer to
information on page 64
A-AXIS ALARM
Refer to
information on page 64
X-AXIS ALARM
Refer to
information on page 64
GRIND MOTOR ERROR -
Refer to information on
page 63
WHEEL TIME OUT ERROR
Refer to information on
page 63
BAD CODE ERROR
Re-
fer to information on
page 64
Stick-Out/Facet Overlap Ad-
justment Refer to information
on page 38
Touch Screen Icon Reference