FEC DSP1500 Main Unit - Manual (Page 7)

vii
Never touch press ram during operation.
Failure to do so may cause injury.
Make sure that no part of your body gets near any moving part of the tool even while the
equipment is at rest. The press ram may lower for some reason resulting in injury.
When performing maintenance or inspection, be sure to secure the press ram with safety
blocks to prohibit the ram from lowering.
Do not remove the motor and gear case of tool.
The press ram may lower resulting in injury.
Do not repair, disassemble, or modify the equipment individual components of the system.
Failure to observe this instruction may cause injury, electric shock, fire, and malfunction.
Never operate the equipment where it is exposed to water, near a corrosive atmosphere or
flammable gases. Failure to observe this instruction may cause fire.
Keep fingers away from the connectors while the equipment is turned ON and for a while
after the equipment is turned OFF. Failure to observe this instruction may cause electric
shock.
Wiring operation and maintenance work shall be conducted by a qualified professional.
Failure to observe this instruction may cause electric shock and injury.
Turn OFF the power when conducting wiring operation and maintenance. Failure to observe
this instruction may cause electric shock and injury.
Never damage the cables, apply excess stress to cables, or squeeze the cables. Never use
damaged cables. Failure to observe this instruction may cause electric shock and fire.
Conduct type-3 grounding of FG terminals.
Failure to observe this instruction may cause electric shock.
In case of an abnormal odor, noise, or operation error occurrence, stop operation
immediately and turn OFF the power source. Failure to observe this instruction may cause
injury and fire.
Install a Power shutdown device in order to ensure the safety of equipment.
Failure to observe this instruction may cause injury.
Install an emergency stop circuit on the outside of equipment in order to stop operation
promptly. Failure to observe this instruction may cause injury.
Keep away from the equipment during recovery from a temporary blackout, and ensure
safety measures are conducted after restarting the equipment. The equipment may suddenly
restart. Failure to observe this instruction may cause injury.
Warning
Safety Precautions