PASCO SPARKvue ver.2.0 - Manual (Page 75)

3. Optional: click the color button in the palette to change the color.
4. Click the point on the image.
5. Drag the box to the other point in the image.
A leader line with length display on the image.
6. If necessary, drag the ends of the measurement tool to the desired location.
7. You can add additional measurement arrows, if needed.
Moving a Measurement tool
Measurements added to images can be moved.
To move a measurement arrow:
1. Click the box at one end of the measurement, and drag it to the desired location.
2. If necessary, click the box at the other end of the measurement tool and drag it to
the desired location.
Document Number: 012-11074D 63
SPARKvue
®
6 Image capture
Measuring in a camera image