PASCO SPARKvue ver.2.0 - Manual (Page 16)

Connecting sensors to the SPARKvue
PASPORT ports. Temperature port. Voltage port.
You can use up to two PASPORT sensors plus a temperature probe and a voltage
probe.
Complete one or more of the following tasks to connect sensors to the SPARK.
n
"Connecting PASPORT sensors to the SPARK SLS": 4
n
"Connecting a temperature probe to the SPARK SLS": 4
n
"Connecting a voltage probe to the SPARK SLS": 4
Connecting PASPORT sensors to the SPARK SLS
1. Plug a PASPORT sensor into one of the PASPORT ports on the top of the SPARK
SLS.
2. Optionally, plug a second PASPORT sensor into the other PASPORT port.
Connecting a temperature probe to the SPARK SLS
Plug the included fast-response temperature probe (or other type of temperature probe)
into the temperature port on the top of the SPARK SLS.
Connecting a voltage probe to the SPARK SLS
Plug the included voltage probe into the voltage port on the top of the SPARK SLS.
Document Number: 012-11074D 4
SPARKvue
®
2 Starting an experiment
Connecting an interface and sensors to your computer