PASCO SPARKvue ver.2.0 - Manual (Page 22)

Building a SPARKlab
When you build a custom SPARKlab, you design each page with your choice of meas-
urements and displays. You can also add text and pictures.
Connect a sensor (or sensors) and complete these steps to start building a SPARKlab.
A. From the Home screen create a new SPARKlab:
Touch Build.
Continue to step 1.
B. Within a SPARKlab add a new page:
Touch the New Page button.
Continue to step 1.
1. Select a template from the library.
Scroll up and down to view templates
2. Touch a display type for each placeholder.
Document Number: 012-11074D 10
SPARKvue
®
2 Starting an experiment
Moving on from the Home screen