Advantech 5000 Series - Manual (Page 74)

Chapter 6
$aaM
Name Read Module Name
Description Returns the module name from a specified ADAM-5000
system.
Syntax $aaM(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system you want to
interrogate.
M is the Module Name command.
(cr) is the terminating character, carriage return (0Dh).
Response !aa5000(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax
error, communication error or if the specified address
does not exist.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
in- valid.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
(cr) is the terminating character, carriage return (0Dh).
ADAM-5000
6-9