Advantech 5000 Series - Manual (Page 135)

Command Set 5017H/5017UH
Analog Input
#aaSiCj
If (data)=” “, it means the channel is invalid.
(dddd) is the input value in two’s complement format of
the specified channel of the specified module. If
(dddd)=” “, it means the channel is invalid.
(cr) is the terminating character, carriage return (0Dh).
Example command: #35S3C2(cr)
response: +9.750 (cr)
The command requests the ADAM-5017H / 5017UH
module in slot 3 of the ADAM-5000 system at address
35h to return the input value of channel 2.
The analog input module responds that the input value
of channel 2 is +9.750.
6-70 ADAM-5000